1. Fill spa or hot tub with water.  Add 4.0 oz. SpaBoss® Prevent II
   per 500 gallons of spa water.

2. Allow to heat up to desired temperature, no more than 104°F.

3. Once filled, start your equipment following the manufacturer's instructions.

4. Add 1.0 oz. SpaBoss® Water Clarifier per 300 gallons.  Circulate for about
   5 minutes.

5. Using a SpaBoss® 4 way Test Strip, test for Total Alkalinity, & pH.

6. Balance the Total Alkalinity, Calcium Hardness & pH of the spa water.

7. Apply SpaBoss® Chlor-Aid according to label instructions.  Establish a
   proper chlorine residual of 1.0 ppm chlorine.

8. Add 1.0 oz. SpaBoss® Descummer per 100 gallons of spa water.

9. Insert Nature2® or Spa Frog® Cartridge properly into filter cartridge.

Weekly:

• Test pH.  Ideal is 7.4 to 7.6.  Acceptable is 7.2 to 7.6.

• Add SpaBoss® Descummer and Prevent II following the
  label instructions.

• Shock your spa or hot tub with SpaBoss® Spa Shock

Monthly:

• Adjust Total Alkalinity (SpaBoss® Alka Rise) & Calcium Hardness (SpaBoss® Cal Rise)
  as necessary.

• Clean filter cartridge with SpaBoss® Cartridge Cleaner to remove excess greases & oils.

Every 3 to 4 Months:

• Use Whirlpool Rinse - Cleans the internal plumbing lines or spas, hot tubs

• Drain, clean, polish and refill spa or hot tub based on usage.

Printer Friendly Version

This information is used by permission.