The natural, proven European way to treat spas & hot tubs.
How to successfully use Aqua Finesse™:
The AquaFinesse spa & hot tub care is so easy to use
bringing you a terrific quality hot water experience.
Different & definitely easier than any other chemical
system you have used. Enjoy!
One day before draining your spa or hot tub, add ONE
AquaFinesse Spa Cleaning Tablet to the spa - just drop it in. Allow to run
overnight or a minimum of 12 hours. This will initially clean out your spa &
prepare it for AquaFinesse.
Drain your spa or hot tub completely. Run the garden hose (or source fill water) for about ONE minute before filling the tub with fresh tap water. (That is to help flush out any bio-film in the garden hose.) You may want to consider using a tap water filter such as the
Pristine Fill pre filter.
Shake the bottle of AquaFinesse™ to mix the solution. Be sure you know the correct number of gallons of water in your spa or hot tub. Pour the correct amount of AquaFinesse™ (as indicated on the bottle) into the water. Do NOT overdose.
Turn on the jets for a minimum of 2 minutes to activate the AquaFinesse™ water care system.
Place (1) sanitizing tablet in the slow-release dispenser. Close the cap & fill it with water then place it on top of filter (or basket).
Check the dispenser every week to make sure tablets are still intact. For tubs with functioning ozone or silver ion systems, the use of sanitizing tablets may not be required.
Granular - use approximately 1/2 capful of Chlorine Concentrate weekly
(up to 250 gallons), adjust as necessary to maintain a 1.0 ppm FAC residual.
Repeat steps 2-4 on the same day every week.
Clean the filter once a week to ensure total sanitation.
Ensure your ozone system is working properly. Perform regular maintenance of your ozone system and consult your dealer if you think it needs repair.
Any more questions? If so, we've
got answers! Click on the link below for the AquaFinesse FAQ's.
